Model: SLR11 series
Product Feature:
1. With locking & monitoring function;
2. Optional coding modes: Universal coding & unique coding;
3. Independent redundant dual signal: In case of hazard caused by signal loop failure;
4. Self-diagnose & cross-diagnose: Periodic double cross-diagnose improves security;
5. Small size: 29.7*29.7 section size;
6. Flexible installation: Directly installed on aluminum frame less than 30mm, brackets is no need.
Product Details
Parameter of safety door switch
| Standard | ISO13849-1 (Category 4 PLe); IEC/EN60947-5-3 | |
| Certificate | CE | |
| Locking model | Mechanical lock/ Power to lock | |
| Safety output | NPN*2/ PNP*2 | |
| Response time | Lock-unlock | 100ms (independent working) |
| Unlock-lock | Approximate 1mA | |
| Locking | Lock holding force | Over 2000N |
| Lock bolt insertion deviation | Less then 2mm | |
| Mechanical endurance | Over 1 million times(door operaing speed 1m/s) | |
| Operating frequency | 1Hz | |
| Minimum radius of revolving door | Over 220mm | |
| Manual unlocking | Front, back | |
| Cascade linking | Max 20 pieces | |
| Control output (OSSD output) | Output type | Transistor output *2 |
| Maximum load current | ≤200mA | |
| Residual voltage (when it it on) | <2.5V@200mA | |
| Voltage when OFF | ≤2V @wire cable 5m | |
| Leakage current | ≤0.5mA | |
| Maximum load capacity | 2.2uF | |
| Load connection resistance | ≤2.5Ω | |
| AUX output (unsafe output) | Output type | Transistor output |
| Output quantity | 1 | |
| Maximum load capacity | 50mA | |
| Residual voltage (when ON status) | ≤2.5V @50mA | |
| External input (breaking current) | Safety input | 1.5mA*2 |
| Reset/ EDM input | About 10mA*1 | |
| Locking control input | About 10mA*1 | |
| Power | Power supply | DC24V±15% |
| Rated capacity | 4.6W (no load) | |
| Protection | Safety circuit protection, current limit, overload protection, overvoltage protection, stop & restart when overheat, reverse polarity protection, transient noise protection, invalid pulse protection | |
| Environment resistance | Housing protection rate | IP65 |
| Operating ambient temperature | -20°c-55°c (no freezing) | |
| Storage temperature | -25°c-70°c (no freezing) | |
| Operating ambient humidity | 5%-95%RH | |
| Storage temperature | 5%-95%RH | |
| Vibraion resistance | 10Hz-55Hz, dounle amplitude 2.0mm, 5minutes each in X, Y and Z directions | |
| Shock resistance | 30g 6 times each in X, Y and Z directions | |
| Risk time | 100ms | |
| Restart time | 3.5s | |
| Material | Nylon/ zinc alloy/ stainless steel | |
Product Size
Model selection
Function of standard mode & advanced mode
| Safety output | AUX output | Safety input | Lock input | EDM | Reset | |
| Standard mode | ● | ● | ● | ● | — | — |
| Advanced mode | ● | ● | ● | ● | ● | ● |
AUX Output
No mark: AUX outputs turning ON/OFF linked with the lock state.
| Door Status | Lock Status | OSSD Output | AUX Output |
| Open | Releasing | OFF | ON |
| Close | Releasing | OFF | ON |
| Close | Locking | ON | OFF |
A: AUX output turn ON/OFF linked with the door opening/closing.
| Door Status | Lock Status | OSSD Output | AUX Output |
| Open | Releasing | OFF | ON |
| Close | Releasing | OFF | OFF |
| Close | Locking | ON | OFF |
Installation
Direction of main unit and actuator
Correction installation
Incorrect installation direction
Mutual interference
When multiple SLR11 used closely, they may malfunction due to mutual interference. In order to avoid mutual interference,please install interlock as below.
Option for Brackets
| Picture | Bracket & Model | Size |
 |
SR11-B01 Inside mounting brackets |
 |
 |
SR11-BL01 Slide mounting bracket (left opening) |
 |
 |
SR11-BR01 Slide mounting bracket (right opening) |
 |
 |
SR11-BL02 Hinge mounting bracket (left opening) |
 |
 |
SR11-BR02 Hinge mounting bracket (right opening) |
 |
