Brand: ESPE
Model: SLM11 series (4 contacts)
Product Feature:
1. Multiple and optional contacts;
2. 1300N holding force;
3. IP67 protection rate;
4. Rotated head & various keys;
5. Support general load and micro-load.
SLM11 Safety Door Switch (4 contacts)
Product Details
Parameter of safety door switch
| Electromagnetic tube | ||
| Rated Voltage | DC24V | |
| Capacity | 4.8W | |
| Rated current | Approximate 200mA | |
| Insulation | Clas B (130°C) | |
| LED indicator | ||
| Rated voltage | DC24V | |
| Rated current | Approximate 1mA | |
| Luminous color (LED) | Green | |
| Safety level | ||
| Certificate | CE TUV | |
| Standard | EN60947-5-1、IEC60947-5-1、GB/T 14048.5、EN ISO 14119、GB/T 18831 | |
| Protection rate | IP67 | |
| Material | PA66 fire retardant | |
| Mechanical lifespan | Over 1,000,000 times | |
| Electrical lifespan | Over 150,000 times (AC240V 3A, resistive load) | |
| Using Type | AC-15 | DC-13 |
| Rated operating voltage(Ue) | 240V | 24V |
| Rated operating current(Ie) | 3A | 2A |
| Electrical parameter | ||
| Contact resistance | <200mΩ | |
| Nominal discharge current (lth) | 10A | |
| Rated insulation voltage (Ui) | 300V | |
| Anti-electric shock level | Class II (double insulation) | |
| Pulse withstand voltage (EN60947-5-1) | 2.5kv | |
| Insulation resistance | >100mΩ | |
| Short-circuit protection | 10A, 250V requires a quick-break fuse | |
| Vibration resistance | 10-55HZ, double amplitude 1.5mm | |
| Impact resistance | Durability1000m/S | |
| Conditional short-circuit current | 100A (EN60947-5-1) | |
| Space of contact | 2×2mm above | |
| Action characteristic | ||
| Direct opening force | Minimum 60N | |
| Direct opening travel | over 10mm | |
| Allowed operating speed | 0.1m-0.5m/s | |
| Allowed operating frequency | Maximum 30 times/minute | |
| Holding force | 1300N | |
| Environment | ||
| Operating environment | 3 (EN60947-5-1) | |
| Operating temperature | -10°C to 55°C ( no freezing) | |
| Operating humidity | <95% RH | |
Product Size
Contacts action
Explanation Nodel (example:SLM11-BPM2)
lnstallation of back unlock device
Precautions for rear release button
1. The release button is a safety measure for emergency evacuation when operator is accidentally trapped in the safety fence(hazard area).
2. Rotate the metal knob 90° anticlockwise to release safety door switch and open the door.
3. After removed danger, please rotate the metal knob 90° clockwise to restore the locked state. The door cannot be locked evenif the door is closed when the release knob is in the unlocked position.
4. Be sure to install the emergency release knob in an operable place inside safety fence (hazardous area).
5. Please do not operate the emergency release knob with tools or apply excessive force or force in directions other than theoperating direction, or beyond the knob rotation angle range, so as to avoid damage to the knob parts and cause failure.
| Back Unlock Device | Back Handle |
| Model:SU-50 | Model:SH-1 |
 |
 |
Option for Brackets
| Installation picture | Bracket Name | Brackets Size |
| Loosen 4 screw on top of head, rotate thehead to the right key inserting position andthen install it. |  |
|
| When install on side hung door, it should be over than semidiameter |  |
|
| Please install the safety switch door and insertion key under range 1-3.5mm |  |
|
| The installation of operation key allows ±1mm deviation within the key insertion center of the hole. |  |
